2-channel amplifier 2x60W

RMS @2 Ohm  2x100W

RMS @4 Ohm  2x70W

RMS bridged @4 Ohm 1x180W

Low pass filter  50Hz-500Hz

High pass filter 50Hz-3kHz

Bass Boost 12/6/0dB (45Hz)

Frequency response 20Hz-20kHz

GAS MAD A1-70.2 is an affordable 2-channel power amplifier with a sound that beats most in its price range! Whether you just want to improve the sound in the car or stand in a parking lot and play, this final stage will impress! The amplifier power is 2x70W RMS in 4 Ohms and the variable dividing filter for high and low pass makes it possible to use the output stage to drive mid-bass, treble or a bass box in bridged mode.

• 2x70W RMS i 4 Ohm
• 2x105W RMS i 2 Ohm
• 1x220W RMS in 4 Ohms (in bridged mode)
• Cocky design
• Really good sound
• Class AB
• High level input with autostart
• RCA output, for easy forwarding to another output stage
• CLIP-indicator

Stays cool, in all situations
The MAD A1 series replaces the best sellers from the BEAT series. GAS has looked after everything. It has been tweaked, optimized and tested. The final result is finally here! At first glance, the eye will be drawn to the heat-dissipating chassis. This ensures optimal cooling for the best possible performance! You can safely sit back and enjoy your favorite music, even when you push the system to its limit. Overheating is a thing of the past, and you can listen to your music completely without interruption.

Amazing outside, impressive inside
It's not all about performance, it's important to be able to have the final step visible in the car without being embarrassed. The streamlined design with thoughtful detailing makes the MAD A1 a final stage you'll be proud to display in your audio build! You know what the coolest thing is? If you look at how the final stage is built, you'll see that the inside has also received some love. The balanced differential inputs also ensure that the output stages deliver less noise, even better sound quality - hard to beat in this price range!

Get the sound in order
Take control of your audio experience! The power stages are equipped with high-pass and low-pass filters with 12 dB steepness, it makes it possible to build the sound system you always dreamed of. Do you want to connect a bass box? No worries! Or do you want to push your trebles on the final stage? No problem! The final stage offers deep, pounding bass or crystal clear treble. Plug in, set up and start playing - that's all!

Puts safety first
It can be a bit tricky to connect the output stage. There is a lot to think about when the connection is to be carried out. You should find a good ground point, maybe run cables through the car and connect the speaker elements correctly. Should there be a fault along the way, GAS has implemented advanced protection circuitry that minimizes the risk of DC, thermal, overload and short circuit problems. The idea is that you should be able to enjoy your favorite music. Completely worry-free!

Specifications
2x70W @ 4 Ohm
2x105W @ 2 Ohm
1x220W (bridged) @ 4 Ohm
Frequency range: 15-22,000 Hz
Attenuation factor: >130
T.H.D+N: 0.5%
High pass filter: 50-4,000 Hz Low
pass filter: 50-4,000 Hz

Excalibur X600.2 ενισχυτής 2 καναλιών - Μέγ. 1200 Watt

Ο X600.2 είναι ο νέος ενισχυτής 2 καναλιών της Excalibur με μέγιστη ισχύ 1200 βατ. Ο ενισχυτής μπορεί να γεφυρωθεί για τη σύνδεση ενός μόνο subwoofer, αλλά με τα 2 κανάλια του είναι επίσης κατάλληλος για τον έλεγχο ενός συνόλου ηχείων. O Excalibur X600.2 διαθέτει εξαιρετικά φαρδιά πτερύγια ψύξης κατά της υπερθέρμανσης και λόγω του μικρού μεγέθους μπορεί να τοποθετηθεί στα περισσότερα κιβώτια subwoofer. 

Άλλα χαρακτηριστικά

Με το σύστημα APTK 3 (Audison Prima Tower Kit 3) είναι δυνατή η στοίχιση μέχρι τριών ενισχυτών AP για εξοικονόμηση χώρου και χωρίς κανένα πρόβλημα υπερθέρμανσης.
(Οι βίδες παρέχονται).